Conference Papers

<
Classification Title Authors Year Conference
C212 A Volume of Fluid Based Model for the Simulation of Bubble Growth Over a Heated Surface Perez-Raya, I. Kandlikar, S.G. 2018 ASME 2018 16th International Conference on Nanochannels, Microchannels, and Microchannels, Dubrovnik, June 10-13, 2018
C211 Improving Liquid Supply Pathways on Graphene Oxide Coated Surfaces for Enhanced Pool Boiling Heat Transfer Performance Rishi, A.M. Gupta, A. Kandlikar, S.G. 2018 ASME 2018 16th International Conference on Nanochannels, Microchannels, and Microchannels, Dubrovnik, June 10-13, 2018
C210 Simulation of Bubble Growth Over a Heated Surface with Interfacial Temperature Gradients and Sharp Interface Perez-Raya, I. Kandlikar, S.G. 2018 ASME International Mechanical Engineering Congress & Exposition (IMECE), Pittsburgh, PA, November 9-15, 2018
C209 Pool Boiling Inversion on Surfaces With Separate Liquid-Vapor Pathways and Enhanced Macroconvection Mechanisms Jaikumar, A. Kandlikar, S.G. 2017 ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels
C208 Enhanced Pool Boiling With HFE7000 Over Selectively Sintered Microchannels Emery, T.S. Kandlikar, S.G. 2017 ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels
C207 Effect of Liquid Volume on Thermosiphon Loop Performance Using Open Microchannels Manifold for CPU Cooling in Data Center Chauhan, A. Kandlikar, S.G. 2017 ASME 2017 15th International Conference on Nanochannels, Microchannels, and Minichannels
C206 CPU cooling with a thermosiphon loop with tapered manifold (OMM) Emery, T.S. Chauhan, A. Del Plato, E. Kandlikar, S.G. 2017 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), Orlando, FL, 2017, pp. 864-870
C205 Electrodeposition of Selective Anions with Non-Electrolyte Bath for Enhancing the Pool Boiling Performance Rishi, A.M. Gupta, A. Kandlikar, S.G. 2017 28th International Symposium on Transport Phenomena, Peradeniya, Sri Lanka, 2017
C204 Effect of Evaporation Momentum Force on Bubble Departure Trajectory Raghupathi, P. Kandlikar, S.G. 2017 28th International Symposium on Transport Phenomena, Peradeniya, Sri Lanka, 2017
C203 Microcavity Augmented Pool Boiling Surfaces Jaikumar, A. Kandlikar, S.G. 2017 28th International Symposium on Transport Phenomena, Peradeniya, Sri Lanka, 2017
C202 Enhanced Flow Boiling Heat Transfer Using Radial Microchannels Recinella, A. Kalani, A. Kandlikar, S.G. 2016 Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14, Washington DC, 2016
C201 Vapor chamber forced convection cooling using flow boiling in open microchannels and tapered manifolds Buchling, P.K. Kandlikar, S.G. 2016 2016 15th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), IEEE, pp. 560–568
C200 Design of an Experimental setup to Investigate an Oscillating and Evaporating Meniscus Using a Feedback Control Loop Recinella, A. Baldwin, J. Krouse, C. Walkowiak, R. Raghupathi, P. Kandlikar, S.G. 2016 Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14, Washington DC, 2016
C199 Modeling of Evaporation Phenomenon Considering Liquid and Vapor Phase Conduction Effects: Stefan Problems Perez-Raya, I. Kandlikar, S.G. 2016 Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14, Washington DC, 2016
C198 Characterization of Effects of Systematically Increased Graphene Dip coating Durations on the Surface Morphology Gupta, A. Jaikumar, A. Kandlikar, S.G. 2016 AIChE Annual Meeting, October 2016/td>
C197 Pool Boiling Enhancement through Graphene and Graphene Oxide Coatings,” Gupta, A. Jaikumar, A. Kandlikar, S.G. 2016 International Workshop on New Understanding in Nanoscale/Microscale Phase Change Phenomena, Norwegian University of Science and Technology, Trondheim, Norway, 2016
C196 Effects of Dip Coating Duration on Surface Morphology and Pool Boiling Enhancement Kandlikar, S.G. 2016 ASME IMECE 2016, November 11-17, Phoenix, Arizona, 2016
C195 Dip Coating of Electrochemically generated graphene and graphene oxide coatings to enhance pool boiling performance Jaikumar, A. Kandlikar, S.G. Gupta, A. 2016 Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14, Washington DC, 2016
C194 Preliminary results of pool boiling of seawater Raghupathi, P. Kandlikar, S.G. 2016 Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14, Washington DC, 2016
C193 Enhanced Flow Boiling Heat Transfer Through Radial” Heat Flux Dissipation of ~1kW/cm2 using Radial Microchannels and Offset Strip Fins Recinella, A. Kandlikar, S.G. 2016 ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14, Washington DC, 2016.
C192 Heat Flux Dissipation of ~1kW/cm2 using Radial Microchannels and Offset Strip Fins Recinella, A. Kandlikar, S.G. 2016 ASME IMECE 2016, November 11-17, Phoenix, Arizona, 2016
C191 Pool boiling performance of shallow microgroove surfaces Raghupathi, P. Kandlikar, S.G. 2016 ASME IMECE 2016, November 11-17, Phoenix, Arizona, 2016
C190 Electrochemical Deposition of Copper on Graphene with High Heat Transfer Coefficient Jaikumar, A. Santhanam, K.S.V. Kandlikar, S.G. Raya, I.B. Raghupathi, P. 2015 Electrochemistry at Primarily Undergraduate Institutions, Abstract MA2015-01 1891, May 26, 2015
C189 Co-design of 3D wireless network-on-chip architectures with microchannel-based cooling Shamin, M.S. Ganguly, A. Munuswamy, C. Venkatarman, J Hernandez, J Kandlikar, S.G. 2015 Green Computing Conference and Sustainable Computing Conference (IGSC), 2015 Sixth International (pp. 1-6). IEEE
C188 Effect Of Channel Width On Pool Boiling Enhancement Of Open Microchannels With Selective Sintered Porous Coatings Jaikumar, A. Kandlikar, S.G. 2015 Proceedings of the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels INTERPACKICNMM2015 July 8-12, 2015, California, USA
C187 Heat Transfer During Evaporation and Boiling at the Three Phase Contact Line Region: A Critical Review Raghupathi, P. Kandlikar, S.G. 2015 Proceedings of the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels INTERPACKICNMM2015 July 8-12, 2015, California, USA
C186 Enhanced Flow Boiling of Ethanol in Open Microchannels With Tapered Manifolds in a Gravity-Driven Flow Buchling, P. Kandlikar, S.G. 2015 Proceedings of the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels INTERPACKICNMM2015 July 8-12, 2015, California, USA
C185 Mechanistic Considerations for Enhancing Flow Boiling Heat Transfer in Microchannels Kandlikar, S.G. 2015 Proceedings of the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels INTERPACKICNMM2015 July 8-12, 2015, California, USA
C184 A Photographic Study of Flow Boiling Stability on a Plain Surface With Tapered Manifold Kalani, A. Kandlikar, S.G. 2015 ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels
C183 Graphene Quantum Dots Bind to Cobalt with Potential Applications For Controlling Cancer: Electrochemical and Spectroscopic Studies Wong, K. Santhanam, K.S.V. Kandlikar, S.G. 2015 Presented at Rochester Academy of Science, November 7, 2015
C182 Overall Performance Evaluation of Embedded Microchannel Cooling Layers for 3D Architecture Chips Gonzalez Hernandez, J.L. Kandlikar, S.G. 2015 Green Computing Conference and Sustainable Computing Conference (IGSC), 2015 Sixth International (pp. 1-6). IEEE
C181 Performance assessment comparison of variable density microchannels for mitigation of temperature non-uniformities Gonzalez Hernandez, J.L. Hernandez-Guerrero, A. Kandlikar, S.G. Rubio-Jimenez, C. Luviano Ortiz, J.L. 2015 ECOS 2015 Conference, Pau, France
C180 Evaporation momentum force on a bubble under asymmetric temperature condition P. Raghupathi S. Kandlikar. 2014 International mechanical engineering conference and exposition
C179 The Effect of Injection and Suction on the Interfacial Mass Transport Resistance in a Proton Exchange Membrane Fual Cell Air Channel Koz, M. Kandlikar, S. G. 2014 Proceedings of the 12th International Conference on Nanochannels, Microchannels, and Minichannels, August 3-7, Chicago, IL, USA
C178 Pressure Drop Analysis Using the Homogeneous Model for Open Microchannel with Manifold (OMM) Kalani, A. Kandlikar, S. G. 2014 Proceedings of the 12th International Conference on Nanochannels, Microchannels, and Minichannels, August 3-7, Chicago, IL, USA
C177 Two Phase Pressure Drop Characteristics During Low Temperature Transients in PEMFCS Banerjee, R. Kandlikar, S. G. 2014 Proceedings of the 12th International Conference on Nanochannels, Microchannels, and Minichannels, August 3-7, Chicago, IL, USA.
C176 Pool Boiling Heat Transfer with Binary Mixture on Open Microchannel Surface Kandlikar, S. G. Kalani, A. 2013 Proceedings of the ASME 2013 11th International Conference on Nanochannels, Microchannels, and Minichannels, June 16-19, Sapporo, Japan
C175 Two-Phase Flow in GDL and Reactant Channels of a Proton Exchange Membrane Fuel Cell Kandlikar, S. G. See, E.J. Gopalan, P. Koz, M. Banerjee, R. 2013 8th International Conference on Multiphase Flow, May 26-31, Jeju, Korea
C174 Pressure Drop and Voltage Response of PEMFC Operation under Transient Temperature and Loading Conditions Banerjee, R. See, E.J. Kandlikar, S. G. 2013 ECS Transactions, 58(1), pp. 1601-1611
C173 Prelimary Results of Pressure Drop Modeling During Flow Boiling in Open Microchannels with Uniform and Tapered Manifolds (OMM) Kalani, A. Kandlikar, S. G. 2013 Proceedings of the ASME 2013 International Mechanical Engineering Congress and Exposition, November 13-21, San Diego, CA, USA
C172 Effect of GDL Material on Thermal Gradients along the Reactant Flow Channels in PEMFCs See, E.J. Kandlikar, S. G. 2013 ECS Transactions, 58(1), pp. 867-880
C171 Experimental Investigation of Flow Boiling Performance of Open Microchannels with Uniform and Tapered Manifolds (OMM) Kalani, A. Kandlikar, S. G. 2013 HT2013-17441, Proceedings of the ASME 2013 Summer Heat Transfer Conference, July 14-19, Minneapolis, MN, USA
C170 Contact Line Characteristics of Liquid-Gas Interfaces over Confined/Structured Surfaces Gopalan, P. Kandlikar, S. G. 2012 Proceedings of the 3rd European Conference on Microfluidics, December 3-5, Heidelberg, Germany
C169 Numerical Simulation of the Interfacial Oxygen Transport Resistance for a PEMFC Cathode Incorporating Water Droplet Coverage Koz, M. Kandlikar, S. G. 2012 ECS Transactions, 50(2), pp. 183-196
C168 A Preliminary Study for 3D Numerical Simulation of a Through-Plane Temperature Profile in a PEMFC Incorporating Coolant channels Koz, M. Kandlikar, S. G. 2012 ICNMM2012-73182, Proceedings of the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, July 8-12, Rio Grande, Puerto Rico
C167 Pool Boiling of FC-87 over Microchannel Surfaces at Atmospheric Pressure Kalani, A. Kandlikar, S. G. 2012 IMECE2012-86186, Proceedings of the ASME 2012 International Mechanical Engineering Congress and Exposition, November 9-15, Houston, Texas, USA
C166 Heat Transfer Enhancement During Pool Boiling Of Water Over Horizontal And Vertical Tubes With Micro Structured Surfaces Mehta, J. S. Kandlikar, S. G. 2012 ICNMM2012-73175, Proceedings of the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, July 8-12, Rio Grande, Puerto Rico
C165 Pool Boiling Heat Transfer over Microchannel Surfaces With Ethanol at Atmospheric Pressure Kalani, A. Kandlikar, S. G. 2012 ICNMM2012-73188, Proceedings of the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, July 8-12, Rio Grande, Puerto Rico
C164 Effect of Channel Material on the Behavior of Water Droplet Emerging from the GDL into the PEMFC Gas Channels Gopalan, P. Kandlikar, S. G. 2012 ECS Transactions, 50(2), pp. 503-512
C163 A Two-Phase Pressure Drop Model Incorporating Local Water Balance in PEM Fuel Cell Gas Channels See, E. J. Kandlikar, S. G. 2012 ECS Transactions, 50(2), pp. 99-111
C162 Micro/Nano Hierarchical Structure in Microchannel Heat Sink for Boiling Enhancement Yao, Z. Lu, Y-W. Kandlikar, S. G. 2012 25th International Conference on Micro Electro Mechanical Systems, Paris, France
C161 Invited Speaker: An Experimental Investigation of Structured Roughness on Heat Transfer During Single Phase Liquid flow at Microscale Lin, T. Y. Kandlikar, S. G. 2011 Proceedings of the 3rd Micro and Nano Flows Conference, August 22-24, Thessaloniki, Greece
C160 Keynote Talk: Challenges of High Heat Flux Removal with Single-Phase and Flow Boiling Heat Transfer Kandlikar, S. G. 2011 International Forum on Frontier Theories of Thermal Science, December 18-20, Beijing, China
C159 A Numerical Study to Predict the Effects of Structured Roughness Elements on Pressure Drop and Heat Transfer Enhancement in Minichannels and Microchannels Dharaiya, V. V. Kandlikar, S. G. 2011 IMECE2011-65262, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition: Energy and Water Scarcity, November 11-17, Denver, CO, USA
C158 Cooling Mechanisms in 3D ICs: Thermo-Mechanical Perspective Kandlikar, S. G. Kudithipudi, D. Rubio-Jimenez, C. A. 2011 2011 International Green Computing Conference and Workshops (IGCC), July 25-28, IEEE, Orlando, FL, USA
C157 Thermal Management Considerations in the Design of an Experimental Fuel Cell with Material Evaluation See, E. J. Banerjee, R. Daino, M. M. Sergi, J. M. Owejan, J. P. Gagliargo, J. J. Kandlikar, S. G. 2011 EFC11237, Proceedings of European Fuel Cell - Piero Lunghi Conference and Exhibition, December 14-16, Rome, Italy
C156 Effect of Channel Geometry on Two-Phase Flow Structure in Fuel Cell Gas Channels Rath, C. D. Kandlikar, S. G. 2011 ICNMM2011-58102, Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, Edmonton, Canada, June 19-22 2011
C155 Investigation of Water Droplet Interaction with the Sidewalls of the Gas Channel in a PEM Fuel Cell in the Presence of Gas Flow Gopalan, P. Kandlikar, S. G. 2011 ECS Transactions, Volume 41, Issue 1, pp. 479-488
C154 Gas Diffusion Layer Material Degradation Mechanisms and Their Effect on Water Breakthrough Dynamics in Proton Exchange Membrane Fuel Cells Garofalo, M. L. Kandlikar, S. G. 2011 EFC11239, Proceedings of European Fuel Cell - Piero Lunghi Conference and Exhibition, December 14-16, Rome, Italy
C153 Advances in Digital Microstructure Generation of PEMFC GDL with Localized Binder and PTFE Distributions Daino, M. M. Kandlikar, S. G. 2011 EFC11275, Proceedings of European Fuel Cell - Piero Lunghi Conference and Exhibition, December 14-16, Rome, Italy
C152 An Experimental Investigation on Heat Transfer Characteristics of Air and CO2 in Microtubes Chen, C-W. Yang, C-Y. Lin, T-Y. Kandlikar, S. G. 2011 ICNMM2011-58102, Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, Edmonton, Canada, June 19-22 2011
C151 Effect of Temperature on the In-Plane Permeability in the Gas Diffusion Layer of a PEM Fuel Cell Banerjee, R. Kandlikar, S. G. 2011 ECS Transactions, Volume 41, Issue 1, pp. 489-497
C150 Effective Thermal Conductivity of Gas Diffusion Layers Used in PEMFC: Measured with Guarded-Hot-Plate Method and Predicted by a Fractal Model Radhakrishnan, A. Lu, Z. Kandlikar, S. G. 2010 ECS Transactions, Volume 33, Issue 1, pp. 1163-1176
C149 Nanoscale Surface Modification Techniques for Pool Boiling Enhancement - A Critical Review and Future Directions Lu, Y-W. Kandlikar, S. G. 2010 FEDSM-ICNMM2010-30170, Proceedings of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010
C148 History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review Kandlikar, S. G. 2010 IHTC14-23353, Proceedings of the 14th International Heat Transfer Conference, Washington, DC, USA, August 8-13, 2010
C147 Through-Plane Water Transport Visualization in an Operating PEM Fuel Cell by Visible and Infrared Imaging Daino, M. M. Lu, Z. LaManna, J. M. Owejan, J. P. Trabold, T. A. Kandlikar, S. G. 2010 ECS Transactions, Volume 33, Issue 1, pp. 1423-1433
C146 Pool boiling heat transfer and bubble dynamics over plain and enhanced microchannels Cooke, D. Kandlikar, S. G. 2010 Third joint US - European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels
C145 Numerical Investigation of Heat Transfer Effects in Microchannels under H2 Boundary Condition Dharaiya, V. V. Srivastava, R. R. Kandlikar, S. G. 2010 IHTC14-23118, 14th International Heat Transfer Conference, Washington, DC, USA, August 8-13, 2010
C144 A Scale Analysis Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Saturated Flow Boiling in Microchannels and Minichannels Kandlikar, S. G. 2009 MNHMT2009-18549, Proceedings of the ASME 2009 2nd Micro/Nanoscale Heat and Mass Transfer International Conference, Shanghai, China, December 18-21, 2009
C143 Natural Patterns Applied to the Design of Microchannel Heat Sinks Rubio-Jimenez, C. A. Rubio-Arana, J. C. Hernandez-Guerrero, A. Kandlikar, S. G. 2009 ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, November 13-19, 2009
C142 Mathematical Model for Fluid Flow in Artificially Roughened Microchannels Wagner, R. N. Kandlikar, S. G. 2009 ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, November 13-19, 2009.
C141 Investigation of Water Vapor Diffusivity Through GDL of a PEMFC LaManna, J. Kandlikar, S. G. 2009 ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, November 13-19, 2009
C140 Evaluation of a Tapered Header Configuration to Reduce Flow Maldistribution in Minichannels and Micrachammels Dharaiya, V. V. Radhakrishnan, A. Kandlikar, S. G. 2009 Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009.
C139 Cooling of Microelectronic Devices Packaged in a Single Chip Module using Single Phase Refrigerant R-123 Pasupuleti, P. Kandlikar, S. G. 2009 Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009
C138 Evaluation of imaging techniques applied to water management research in PEMFCs Daino, M. M. Kandlikar, S. G. 2009 Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009
C137 In Situ Characterization of Two-Phase Flow in Cathode Channels of an Operating PEM Fuel Cell with Visual Access Sergi, J. M. Lu, Z. Kandlikar, S. G. 2009 ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009
C136 Numerical Simulation of Single Phase Liquid Flow in Narrow Rectangular Channels with Structured Roughness Walls Srivastava, R. R. Schneider, N. M. Kandlikar, S. G. 2009 ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009
C135 Measurement of Heat Transfer in the Entrance Region of Small Diameter Tubes Lin, T. Y. Yang, C. Y. Kandlikar, S. G. 2009 ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009
C134 Simulation of Heat and Mass Transport in Gas Flow Streams of a PEMFC from Water Management Perspective LaManna, J. Underhill, R. Kandlikar, S.G. 2008 Nineteenth International Symposium on Transport Phenomena, Reykjavik, Iceland, August 17-20, 2008
C133 Two-Phase Flow Considerations in PEMFC Design and Operation Owejan, J.P. Gaglioardo, J.J Sergi, J.M. Trabol, T.A. 2008 ICNMM2008-62037, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008.
C132 Effects of Roughness on Turbulent Flow in Microchannels and Minichannels Brachbill, T.P. Kandlikar, S.G. 2008 ICNMM08-62224, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008.
C131 A Critical Review of Water Transport Models in Cas Diffusion Media of PEM Fuel Cell LaManna, J. Kandlikar, S.G. 2008 ICNMM08-62201, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008.
C130 Investigation Of Water Transport In An Ex-Situ Experimental Facility Modeled On An Actual DOE Automotive Target Compliment Fuel Cell Lu, Z. White, A. D. Pelaez, J. Hardbarger, M. Domigan, W. Sergi, J. Kandlikar, S. G. 2008 ICNMM2008-62200, Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008.
C129 Surface Roughness Effects on Heat Transfer in Microscale Single Phase Flow: A Critical Review Young, P.L. Kandlikar, S.G. 2008 ICNMM08-62192, Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008.
C128 Investigation of Fouling and its Mitigation in Silicon Microchannels Young, P.L. Kandlikar, S.G. 2008 ICNMM2008-62038, Proceedings of the Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008.
C127 Current Status and Fundamental Research Needs In Thermal Management within a PEMFC Stack Kandlikar, S. G. Lu, Z. Trabold, T. 2007 Keynote Paper, 10th UK Heat Transfer Conference, Edinburgh,September 10-12, 2007.
C126 A Roadmap For Implementing Minichannels In Refrigeration And Air-Conditioning Systems- Current Status And Future Directions Kandlikar, S. G. 2007 Heat Transfer Engineering, 28-12, p.973-985.
C125 Effect Of Non-Uniform Flow Distribution On Single Phase Heat Transfer In Parallel Microchannels Bapat, A.V. Kandlikar, S.G. 2007 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007
C124 Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell Owejan, J.P. Trabol, T.A. Jacobson, D.L. Arif, M. Kandlikar, S.G. 2007 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp 401-408, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007
C123 Effects of Freezing and Thawing on the Structures of Porous Gas Diffusion Media Pelaez, J.A. Kandlikar, S.G. 2007 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007,pp.401-408, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007
C122 Estimating Roughness Parameters Resulting from Various Machining Techniques for Fluid Flow Application Young, P.L. Brackbill, T.P. Kandlikar, S.G. 2007 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, v 2007 B,pp.827-836. Cited 1 time. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007
C121 Effects of Low Uniform Relative Roughness on Single-Phase Friction Factors in Microchannels and Minichannels Brackbill, T.P. Kandlikar, S.G. 2007 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp.509-518. Cited 1 time, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007
C120 A Review of Models For Water Droplet Detachment from the Gas Diffusion Layer-Gas Flow Channel Interface in PEMFC's Schillberg, C.H. Kandlikar, S.G. 2007 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp. 299-310, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007
C119 Further Evaluation of a Flow Boiling Correlation For Microchannels and Minichannels Peters, J.V.S. Kandlikar, S.G. 2007 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp 11-17. v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007
C118 Numerical Study of Effecct of Contact Angle on Bubble Growth and Wall Heat Transfer During Flow Boiling of Water in a Microchannel Mukherjee, A. Kandlikar, S.G. 2006 13th International Heat Transfer Conference, Sydney, Austrailia, August 13-18, 2006
C117 A Numerical Analysis Of Growing Water Droplet Inside Air Supply Channel Of A PEM Fuel Cell Mukherjee, A. Kandlikar, S.G. 2006 American Society of Mechnical Engineers, Fluid Engineering Division, (Publication) FED
C116 Critical Heat Flux Measurement And Model For Refrigerant-123 Under Stabalized Flow Conditions In Microchannels Kuan, W.K. Kandlikar, S.G. 2006 American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD
C115 Investigation of Fouling in Microchannels Perry, J.L. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 837-845
C114 Thermohydraulic Performance Analysis of Offset Strip Fin Microchannel Heat Exchangers Bapat, A.V. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 347-354
C113 Single-Phase Liquid Heat Transfer in Plain and Enhanced Microchannels Steinke, M.E. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 943-951
C112 A Review of Manufacturing Processes for Microchannel Heat Exchanger Fabrication Ashman, S. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 855-860
C111 Effect of Triangular Roughness Elements on Pressure Drop and Laminar-Turbulent Transition in Microchannels and Minichannels Brackbill, T.P. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 747-755
C110 Numerical Study of the Effect of Surface Tension on Vapor Bubble Growth During Flow Boiling in Microchannels Mukherjee, A. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 61-66
C109 Experimental Study on the Effect of Stabilization on Flow Boiling Heat Transfer in Microchannels Kuan, W.K. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 53-60
C108 Experimental Study on Saturated Flow Boiling Critical Heat Flux in Microchannels Kuan, W.K. Kandlikar, S.G. 2006 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 45-52
C107 Development Of An Intrumented Glass Microchannel Device For Critical Heat Flux Visualization And Studies Jain, A. Borca-Tasciuc, T. Roday, A. P. Jensen, M. K. Kandlikar, S.G. 2005 Annual IEEE Semiconductor Thermal Measurement And Management Symposium, pp.26-30
C106 Extending The Heat Flux Limit With Enhanced Microchannels In Direct Single-Phase Cooling Of Computer Chips Kandlikar, S. G. Upadhye, H.R. 2005 Annual IEEE Semiconductor Thermal Measurement And Management Symposium, pp.8-15
C105 Development Of An Experimental Facility For Investigating Critical Heat Flux of saturated Flow Boiling Of Refrigerant-123 In Microchannels Kuan, W.K. Kandlikar, S.G. 2005 American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD 376 HTD (2), pp. 221-226
C104 A Numerical Analysis Of Vapor Bubble Growth And Wall Heat Transfer During Flow Boiling Of Water In A Microchannel Mukherjee, A. Kandlikar, S. G. 2005 American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD 376 HTD (2), pp. 221-226
C103 Numerical Simulation of Flow Through Microchannels in Bipolar Plate Rawool, A. S. Mitra, S. K. Agrawal, A. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C102 Experimental Evaluation of Pressure Drop Elements and Fabricated Nucleation Sites for Stabilizing Flow Boiling in Minichannels and Microchannels Kandlikar, S. G. Willistein, D. A. Borrelli, J. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C101 Numerical Study of the Effect of Inlet Constriction on Bubble Growth During Flow Boiling in Microchannels Mukherjee, A. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C100 Water Transport Visualization and Two-Phase Pressure Drop Measurements in a Simulated PEMFC Cathode Minichannel Borrelli, J. Kandlikar, S. G. Trabold, T. Owejon, J. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C099 Single-Phase Liquid Heat Transfer in Microchannels Steinke, M. E. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C098 Single-Phase Liquid Friction Factors in Microchannels Steinke, M. E. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C097 Effects of Repeating Microstructures on Pressure Drop in Rectangular Minichannels Schmitt, D. J. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C096 An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels English, N. J. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C095 Review of Fabrication of Nanochannels for Single Phase Liquid Flow Perry, J. L. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C094 High Heat Flux Removal with Microchannels - A Roadmap of Challenges and Opportunities Kandlikar, S. G. 2005 third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C093 Characterization of the Effect of Surface Roughness and Texture on Fluid Flow: Past, Present, and Future Taylor, J. B. Carrano, A. L. Kandlikar, S. G. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C092 Development of an Experimental Facility for Investigating Single-Phase Investigating Steinke, M. E. Kandlikar, S. G. Magerlein, J. H. Colgan, E. Raisanen, A. D. 2005 Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).
C091 Effect of Dynamic Contact Angle on Single Bubbles During Nucleate Pool Boiling Mukherjee, A. Kandlikar, S.G. 2004 IMECE2004-59976, ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, USA, November 13-20, 2004
C090 Numerical Study of an Evaporating Meniscus on a Moving Heated Surface Mukherjee, A. Kandlikar, S. G. 2004 ASME Heat Transfer/Fluids Engineering Summer Conference, July 11-15, 2004, Charlotte, North Carolina USA ASME Publications (2004).
C089 Experimental Study of Heat Transfer, Pressure Drop, and Dryout for Flow Boiling of Water in an Oil Heated Minichannel. Campbell, L. A. Kandlikar, S. G. 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C088 Single-Phase Heat Transfer Enhancement Techniques in Microchannel and Minichannel Flows. Steinke, M. E. Kandlikar, S. G. 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C087 Effect of Entrance Condition on Frictional Losses and Transition to Turbulence in Minichannel Flows. Campbell, L. A. Kandlikar, S. G. 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C086 Optimization of Microchannel Geometry for Direct Chip Cooling Using Single Phase Heat Transfer. Upadhye, H. R. Kandlikar, S. G. 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C085 Evaluation of Single Phase Flow in Microchannels for High Flux Chip Cooling - Thermohydraulic Performance Enhancement and Fabrication Technology. Kandlikar, S. G. Grande, W. J. 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C084 Effect of Gravitational Orientation on Flow Boiling of Water in 1054 X 197 Micron Parallel Minichannels. Kandlikar, S. G. Balasubramanian 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C083 Experimental Study of Flow Patterns, Pressure Drop and Flow Instabilities in Parallel Rectangular Minichannels. Balasubramanian, P. Kandlikar, S. G. 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C082 Numerical Simulation of Growth of a Vapor Bubble During Flow Boiling of Water in a Microchannel. Mukherjee, A. Kandlikar, S. G. 2004 Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).
C081 Thermal management of a polyimide V-groove leg actuator for a walking micro-robot Khire, R.A. Kandlikar, S. G. Walter, W.W. Raisanen, A. Sahin, F. 2003 American Society of Mechanical Engineers, Micro-Electromechanical Systems Division Publication (MEMS), 5, pp. 655-662
C080 On the nature of critical heat flux in microchannels Bergles, A.E. Kandlikar, S. G. 2003 American Society of Mechanical Engineers, Electronic and Photonic Packaging, EPP, 3, pp. 701-707
C079 Predicting heat transfer during flow boiling in minichannels and microchannels Kandlikar, S. G. Steinke, M.E. 2003 ASHRAE Transactions, 109 PART 1, pp. 667-676
C078 Comparison of Flow Patterns During Flow Boiling in Single (Dh = 333 �m) and Parallel Rectangular Channels (Dh = 207 �m) Balasubramanium, P. Kandlikar, S.G. 2003 IMECE2003-42089, ASME International Mechanical Engineering Congress, Washington, D.C., November 15-21, 2003.
C077 Flow Boiling and Pressure Drop in Parallel Flow Microchannels Steinke, M. E. Kandlikar, S. G. 2003 Proceedings of 1st International Conference on Minichannels and Microchannels April 24-25, 2003 Rochester, NY Paper 1070 . ASME Publications (2003): 567-587
C076 Examples of Microchannel Mass Transfer Processes in Biological Systems Kandlikar, S. G. Steinke, M. E. 2003 Proceedings of 1st International Conference on Minichannels and Microchannels April 24-25, 2003 Rochester, NY Paper 1124 . ASME Publications (2003).
C075 Heat Transfer from a Moving and Evaporating Meniscus on a Heated Surface Kandlikar, S. G. Kuan, W. K. 2003 Source Summer Heat Transfer Conference July 21-23, 2003, Las Vegas, Nevada, USA HT2003-47449, ASME Publications, 2003.
C074 High Speed Photographic Observation of Flow Patterns During Flow boiling in Single Rectangular Minichannel Kandlikar, S. G. Balasubramanian, P. 2003 Source Summer Heat Transfer Conference July 21-23, 2003, Las Vegas, Nevada, USA HT2003-47175, ASME Publications, 2003.
C073 Extending the Applicability of the Flow Boiling Correlation to Low Reynolds Number Flows In Microchannels. Kandlikar, S. G. Balasubramanian, P. 2003 Kandlikar, S.G. and Balasubramanian, P., 2003 "Extending the Applicability of the Flow Boiling Correlation to Low Reynolds Number Flows in Microchannels." Source First International Conference on Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1074, S.G. Kandlikar, Editor ASME Publication, 2003.
C072 Critical Heat Flux in Microchannels: Experimental Issues and Guidelines for Measurement. Kandlikar, S. G. Bergles, A. E. 2003 Kandlikar, S.G. and Bergles A.E., 2003 "Critical Heat Flux in Microchannels: Experimental Issues and Guidelines for Measurement." Source First International Conference on Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1016, S.G. Kandlikar, Editor ASME Publication, 2003.
C071 Heat Transfer Mechanisms During Flow Boiling In Microchannels. Kandlikar, S. G. 2003 Kandlikar, S.G., 2003 "Heat Transfer Mechanisms During Flow Boiling in Microchannels." Source First International Conference on Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1005, S.G. Kandlikar, Editor ASME Publication, 2003.
C070 Flow Boiling In Microchannels: Non-Dimensional Groups and Heat Transfer Mechanisms Kandlikar, S.G. 2003 Thermique et Microtechnologies Proceedings of congres de la societe Francais de la Thermique 2003, pp. 3-21, Editors P. Marty, A. Bontemps, S. LePerson, F. Ayela, June 3-6, 2003.
C069 Microchannels and Minichannels - History, Terminology, Classification and Current Research Needs. Kandlikar, S. G. 2003 Kandlikar, S.G., 2003 "Microchannels and Minichannels - History, Terminology, Classification and Current Research Needs." Source First International Conference On Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1000, S.G. Kandlikar,Editor ASME Publication, 2003.
C068 Transient Thermal Analysis of a Microprocessor Using a Heat Spreader with Variable Thermal Storage Characteristics Steinke, M.E. Kandlikar, S.G. 2002 1st Proceedings of International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics, Kruger Park, South Africa, April 8-10, 2002.
C067 Flow Boiling Heat Transfer Coefficient in Minichannels - Correlation and Trends Kandlikar, S. G. Steinke, M. E. 2002 Proceedings of 12th International Heat Transfer Conference, Aug 2002, Grenoble, France, Paper # 1178, 2002.
C066 Computer Simulated Transient Analysis of a Polyimide V-Groove Leg Actuator with Serpentine Heater for a Walking Micro-Robot Khire, R. A. Kandlikar, S. G. Walter, W. W. 2002 Paper presented at the First World Congress on Biomimetics and Artificial Muscles Albuquerque, New Mexico, Dec. 9-11.
C065 Single-Phase Flow Characteristics and Effect of Dissolved Gases on Heat Transfer Near Saturation Conditions in Microchannels Kandlikar, S. G Steinke, M. E. Balasubramanian, P. 2002 Proceedings of International Mechanical Engineering Congress and Exposition 2002, New Orleans, Nov. 17-21, ASME.
C064 Effect of Entrance Condition on Frictional Losses and Transition to Turbulence Kandlikar, S. G. Campbell, L. 2002 Paper No. IMECE2002-39573, International Mechanical Engineering Conference and Exposition 2002, New Orleans, Nov. 17-21, ASME.
C063 Evolution of Microchannel Flow Passages - Thermohydraulic Performance and Fabrication Technology Kandlikar, S. G. Grande, W. J. 2002 Paper No. IMECE2002-32043, International Mechanical Engineering Conference and Exposition 2002, New Orleans, Nov. 17-21, ASME, Also being published in Heat Transfer Engineering, Vol. 25, No. 1, Jan. 2003.
C062 Insight Into Mechanisms and Review of Available Models for Critical Heat Flux (CHF) in Pool Boiling Kandlikar, S. G. 2002 Keynote Lecture KS1, to appear in the 1st Proceedings of International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics 8-10 April 2002, Kruger Park, South Africa.
C061 Effects of Weber Number and Surface Temperature on the Boiling and Spreading Characteristics of Impinging Water Droplets Kandlikar, S. G. Steinke, M. E. Singh, A. 2001 35th Proceedings of National Heat Transfer Conference, June 2001, Anaheim, CA. Paper # NHTC01-11672. ASME Publications, 2001.
C060 High-Speed Photographic Observation of Flow Boiling of Water in Parallel Minichannels Kandlikar, S. G. Steinke, M. E. Tian, S. Campbell, L. A. 2001 35th Proceedings of National Heat Transfer Conference, June 2001, Anaheim,CA. Paper # NHTC01-11262. ASME Publications.
C059 Molecular Dynamics Simulation and Measurement of Contact Angle of Water Droplet on a Platinum Surface Kandlikar, S. G. Steinke, M. E. Maruyama, S. Kimura, T. 2001 ASME Proceedings of International Mechanical Engineering Congress and Exposition, Nov. 2001, Paper #IMECE01-2832, New York, NY.
C058 High Speed Photographic Investigation of Liquid-Vapor Interface and Contact Line Movement During CHF and Transition Boiling Kandlikar, S. G. Steinke, M. E. 2001 Proceedings of International Mechanical Engineering Congress and Exposition, Nov. 2001, New York, NY.
C057 A Photographic Insight into the Motion of Liquid-Vapor Interface During Rapid Evaporation of a Liquid Droplet on a Heated Surface Kandlikar, S. G. 2001 Paper presented at the ASME IMECE 2001, Paper #IMECE01, New York, NY.
C056 Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels Kandlikar, S. G. 2001 Keynote Lecture presented at the International Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics Conference, Thessaloniki, Greece, September 2001. Also published in Experimental Thermal and Fluid Science, Vol. 26, pp. 389-407, 2002.
C055 Effect of Channel Roughness on Heat Transfer and Fluid Flow Characteristics at Low Reynolds Numbers in Small Diameter Tubes Kandlikar, S. G. Joshi, S. Tian, S. 2001 Presentation at the ASME National Heat Transfer Conference, Los Angeles, CA, June 10-12, 2001.
C054 Contact Angle Of Droplets During Spread and Recoil After Impinging on a Heated Surface Kandlikar, S. G. Steinke, M. 2001 IchemE Chemical Engineering Research and Design, April 2001.
C053 Microscale Heat Transfer, Flow Boiling in Microchannels Keynote Speaker 2000 2000 IAMS International Seminar on Thermal Design and Management for Electronic Equipment and Material Processing, Institute of Advanced Material Study, Kyushu University, Kasuga, Japan, October 10-11, 2000.
C052 Understanding Thermal and Hydrodynamic Mechanisms Leading to CHF in Pool Boiling Keynote Speaker 2000 International Workshop on Current Status and Future Directions in Boiling Heat Transfer and Two-Phase Flow, Organized by M. Ozawa, S.G. Kandlikar and Y. Fujita, and M. Shoji, Kansai University, Osaka, Japan, October 5-6, 2000.
C051 The Effects of Flow Rate and Sodium Laurel Sulfate Surfactant Concentration on Single- and Two-Phase Heat Transfer Characteristics in a Microchannel M. S. June Kandlikar, S. G. 2000 Paper presented at the NHTC 2000 conference in Pittsburgh, August 2000.
C050 Flow Boiling Heat Transfer with Binary and Ternary Mixtures in Microfin Tubes Inoue, N. Goto, M. Kandlikar, S. G. 2000 Paper presented at the ASME IMECE 2000, Orlando, Advances in Enhanced Heat Transfer, HTD-Vol. 365, PID-Vol. 4, pp. 23-34.
C049 Critical Heat Flux in Subcooled Flow Boiling - An Assessment of Current Understanding and Future Directions for Research Kandlikar, S. G. 2000 Proceedings of the Engineering Foundation Conference, Anchorage, Alaska, April 30-May 5, 2000.
C048 Correlating Evaporation Heat Transfer Coefficient of Refrigerant R-134a in a Plate Heat Exchanger Donowski, V. D. Kandlikar, S. G. 2000 Donowski, V.D., and Kandlikar, S.G., 2000, "Correlating Evaporation Heat Transfer Coefficient of Refrigerant R-134a in a Plate Heat Exchanger." Paper presented at the Engineering Foundation Conference on Pool and Flow Boiling, April, Alaska, May 2000.
C047 A Theoretical Model To Predict Pool Boiling CHF Incorporating Effects Of Contact Angle And Orientation Kandlikar, S. G. 2000 Paper presented at the ASME National Heat Transfer Conference 2000, Session on Fundamentals of CHF in Pool and Flow Boiling, Pittsburgh. Also accepted for publication in ASME Journal of Heat Transfer.
C046 Further Assessment of Pool and Flow Boiling Heat Transfer with Binary Mixtures Kandlikar, S. G. Tian, S. Yu, J. Koyama, S. 1999 Two-Phase Flow Modelling and Experimentation 1999, Proceedings of the 2nd International Symposium on Two-phase Flow Modeling and Experimentation, Pisa, Italy, May 23-26, 1999, Eds. Celata, G.P., Di Marco, P., and Shah, R.K., pp. 197-204.
C045 Convective Heat Transfer of Binary Mixtures Under Flow Boiling Conditions McAssey, E. V., Jr. Kandlikar, S. G. 1999 Two-Phase Flow Modelling and Experimentation 1999, Proceedings of the 2nd International Symposium on Two-phase Flow Modeling and Experimentation, Pisa, Italy, May 23-26, 1999, Eds. Celata, G.P., Di Marco, P., and Shah, R.K., pp. 271-278.
C044 An Experimental Investigation on Flow Boiling Performance of Enhanced Surfaces with Laser Drilled Holes Kandlikar, S. G. Fogarty, R. 1999 Paper presented at the Engineering Foundation Conference on Compact Heat Exchangers and Enhancement Technology for Process Industries, July 18-23.
C043 An Experimental Investigation on Flow Boiling of Ethylene-Glycol/Water Mixture Kandlikar, S. G. Bulut, M. 1999 Paper presented at the 1999 National Heat Transfer Conference at Albuquerque, August, 1999.
C042 Effects of surface tension and binary diffusion on pool boiling of dilute solutions an experimental assessment Kandlikar, S. G. 1998 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 357 (3), pp. 63-69
C041 Boiling Heat Transfer with Binary Mixtures Kandlikar, S. G. 1998 Keynote Speech at the 35th Heat Transfer Symposium of Japan, Nagoya, May 28.
C040 Effect of Surface Finish on Flow Boiling Heat Transfer Kandlikar, S. G. Spiesman, P. 1998 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 361-1, pp. 157-163
C039 Heat transfer characteristics in partial boiling, fully developed boiling, and significant void flow regions of subcooled flow boiling Kandlikar, S. G. 1997 American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 244, pp. 131-139
C038 Boiling heat transfer with binary mixtures part II - Flow boiling in plain tubes Kandlikar, S. G. 1997 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 342, pp. 27-34
C037 Boiling heat transfer with binary mixtures part I- A theoretical model for pool boiling Kandlikar, S. G. 1997 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 342, pp. 19-26
C036 Bubble Nucleation and Growth Characteristics in Subcooled Flow Boiling of Water Kandlikar, S. G. Mizo, V. R. Cartwright, M. D. Ikenze 1997 HTD-Vol. 342, ASME Proceedings of the 32nd National Heat Transfer Conference, Vol. 4, pp.11-18.
C035 Effect of Surface Characteristics on Flow Boiling Heat Transfer Kandlikar, S. G. Spiesman, P. H. 1997 Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25.
C034 Investigating the Effect of Heating Method on Pool Boiling Heat Transfer Kandlikar, S. G. Lombardo, M. 1997 Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25.
C033 Bubble Characteristics and Convective Effects in the Flow Boiling Heat Transfer of Binary Mixtures Kandlikar, S. G. Raykoff, T. 1997 Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25.
C032 Further Developments in Subcooled Flow Boiling Heat Transfer Kandlikar, S. G. 1997 Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25.
C031 Artwork - A Review of Research Work Done by Professor Arthur (Art) E. Bergles Kandlikar, S. G. 1996 Plenary Paper presented at the Symposium on Process, Enhanced, and Multiphase Heat Transfer, Atlanta, GA.
C030 Predicting Flow Boiling Heat Transfer of Refrigerants in Microfin Tubes Kandlikar, S. G. Raykoff, T. 1996 Proceedings of the Second European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Rome, Italy, May 29-31, Eds. Celata, G.P., DiMarco, P., and Mariani, A., Vol. 1, pp. 241-246.
C029 Investigation of Nucleation Characteristics and Heat Transfer on Microfin Surfaces kandlikar, S. G. Howell, M. J. 1996 Proceedings of the Second European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Rome, Italy, May 29-31, Eds. Celata, G.P., DiMarco, P., and Mariani, A., Vol. 1, pp. 241-246.
C028 Transient Performance of Parallel and Counter-flow Heat Exchangers with a Step Temperature Change on Minimum Capacity Rate Fluid Stream Kandlikar, S. G. Bunce, D. J. Cole, B. D. 1995 Paper presented at the Symposium on Thermal Science and Engineering in Honor of Chancellor Chang-Lien Tien, University of California, Berkeley, November 14.
C027 Bubble Nucleation, Growth and Departure in Flow Boiling Kandlikar, S. G. 1995 Paper presented at the Society of Engineering Sciences Conference, Nov., New Orleans.
C026 Transient Response of Heat Exchangers Bunce, D. J. Kandlikar, S. G. 1995 Heat and Mass Transfer 95, Proceedings of the Second ISHMT-ASME Heat and Mass Transfer Conference, Mangalore, India, Dec. 28-31, Surathkal, India.
C025 Investigation of Bubble Departure Mechanism in Subcooled Flow Boiling of Water Using High-Speed Photography Kandlikar, S. G. Carwright, M. D. Mizo, V. R. 1995 Convective Flow Boiling, Proceedings of Convective Flow Boiling, An International Conference held at the Banff Center for Conferences, Banff, Alberta, Canada, April 30-May 5, Taylor and Francis, pp. 161-166.
C024 A Photographic Study of Nucleation Characteristics of Cavities in Flow Boiling Kandlikar, S. G. Carwright, M. D. Mizo, V. R. 1995 Proceedings of Convective Flow Boiling, An International Conference held at the Banff Center for Conferences, Banff, Alberta, Canada, April 30-May 5, Taylor and Francis, pp. 73-78.
C023 Bubble Behavior and Departure Bubble Diameter of Bubbles Generated Over Nucleating Cavities in Flow Boiling Kandlikar, S. G. 1992 Pool and External Flow Boiling, Eds. V. K. Dhir and A. E. Bergles, Proceedings of the Engineering Foundaton Conference, Santa Barbara, CA, March 22-27, 1992.
C022 Correlating Heat Transfer Data in Binary Systems Kandlikar, S. G. 1991 Paper presented at the National Heat Transfer Conference, July, Minneapolis; Phase Change Heat Transfer, Eds. Hensel, E., Dhir, V.K., Greif, R., and Fillo, J., HTD-Vol. 159, pp. 163-170, ASME.
C021 Heat Transfer and Pressure Drop Characteristics of Magnet Winding During Cooldown with Flow Boiling of LN2 Kandlikar, S. G. Pisera, J. Kytomaa, H. K. Thome, R. J. 1991 Paper presented at the Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Dubrovnik, Yugoslavia, August 1991.
C020 Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids in Circular Tubes Kandlikar, S. G. 1991 Heat Transfer with Phase Change, Habib, I.S. et al., eds., ASME HTD-Vol. 114, pp. 51-62, 1990. Also published in Transactions of ASME, Journal of Heat Transfer, Vol. 113, pp. 190-200, 1991.
C019 A Model for Flow Boiling Heat Transfer in Augmented Tubes and Compact Evaporators Kandlikar, S. G. 1990 Paper presented at the 1990 ASME Winter Annual Meeting, Dallas, Nov. 25-30, 1990.
C018 Flow Boiling Maps for Water, R-22 and R-134a in the Saturated Region Kandlikar, S. G. 1990 Kandlikar, S. G., "Flow Boiling Maps for Water, R-22 and R-134a in the Saturated Region", paper presented at the 9th International Heat Transfer Conference, Jerusalem, August, 1990.
C017 A Mechanistic Model for Flow Boiling Heat Transfer Kandlikar, S. G. 1990 " Paper presented at the 1990 ASME Winter Annual Meeting, Dallas, Nov. 1990.
C016 Development of a flow boiling map for subcooled and saturated flow boiling of different fluids inside circular tubes Kandlikar, S. G. 1989 ASME Heat Transfer Division HTD, 114, pp. 51-62
C015 Review of literature and a preliminary experimental investigation on start-up instabilities in an R-11 thermosiphon loop with applications in microelectronic chip cooling Kandlikar, S. G. Habsberg, S. 1989 ASME Heat Transfer Division HTD, 115, pp. 7-13
C014 Instabilities In an R-11 Thermosiphon Loop with Applications in Microelectronic Chip Cooling Kandlikar, S. G. Habsberg, S. 1989 Paper presented at the ASME Winter Annual Meeting, San Francisco, Dec. 1989.
C013 The Influence of the Number of Thermal Plates on Plate Heat Exchanger Performance Shah, R. K. Kandlikar, S. G. 1988 Special volume to honor Dr. Ramachandran at National Heat Transfer Conference, India, 1988.
C012 A Parametric Study of Saturated Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes Kandlikar, S. G. 1988 Experimental Fluid Mechanics, Heat Transfer and Thermodynamics, Shah, R.K., Ganic, E.N., and Yang, K.T., editors, Hemisphere Publishing Corp, Washington, 1988.
C011 MULTIPASS PLATE HEAT EXCHANGERS - EFFECTIVENESS-NTU RESULTS AND GUIDELINES FOR SELECTING PASS ARRANGEMENTS Kandlikar, S. G. Shah, R.K. 1987 American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD, 81, pp. 59-75
C010 COMPUTER AIDED LEARNING OF AN INTERACTIVE PACKAGE FOR THERMODYNAMIC PROCESSES AND AN EXPERIMENTAL FACILITY FOR A STUDY OF REAL PROCESSES Karlekar Balwant, V. Kandlikar, S. G. 1985 ASEE Annual Conference Proceedings, 1, pp. 369-372.
C009 An Improved Correlation for Predicting Two-phase Boiling Heat Transfer Coefficient in Horizontal and Vertical Tubes Kandlikar, S.G. 1983 Heat Exchangers for Two-phase applications, ASME, HTD, 27
C008 A New Correlation for Heat Transfer During Flow Boiling Kandlikar, S. G. Thakur, B. K. 1982 Paper presented at the 16th Southeastern Seminar on Thermal Sciences, 1982.
C007 A New Absorber Heat Recovery Cycle to Improve COP of Aqua-Ammonia Absorption Refrigeration System Kandlikar, S.G. 1982 ASHRAE Transactions, 88(1), pp. 141-158
C006 Ice Growth in Rivers Desmond, R. M. Karlekar, B. V. Kandlikar, S. G. 1981 International Symposium on Ice, Quebec City, 1981.
C005 Geometrical Aspects of a Cylindrical Parabolic Collector Operated with Intermittent Tracking Kandlikar, S. G. Vij, S. K. 1978 In SUN, Mankind's Future Source of Energy, Proceedings of the International Solar Energy Society Congress, eds. De Winter, F. and Cox, M., pp. 1254-1258, 1978.
C004 PREDICTING THE THERMODYNAMIC PROPERTIES OF SUPERHEATED VAPOR MIXTURES OF R-22 AND R-12 Kandlikar, S. G. 1977 ASHRAE Transactions, 83 (Pt 2), pp. 235-241.
C003 Predicting the Properties of Mixtures of R22 and R12: Part 2-Transport Properties Kandlikar, S.G. Bijlani, C.A. Sukhatme, S.P. 1975 ASHRAE Transactions,81(2)
C002 Predicting the Properties of Mixtures of R22 and R12: Part 1- Thermodynamic Properties Kandlikar, S.G. Bijlani, C.A. Sukhatme, S.P. 1975 ASHRAE Transactions, 81(1)
C001 Binary Annular Two-phase Flow with Mixture Refrigerants Kandlikar, S. G. Sukhatme, S. P. 1975 Presented at the third National Conference, Bombay, India, 1975.